Embedded World returns to Nuremberg now: 26-28 February 2019!

Hello folks,
now the first day of the fair is already over!
What should we say?
"Wow! Many thanks to all visitors of our booth. We are impressed by the number and quality of the good conversations!
That was only day 1. Wait - on day 2 we will have even more top news about IoT and Edge Computing ready for you.

Here we show you a selection of pictures at the beginning of the day. Later we didn't have time to take more pictures!
But more will come tomorrow!

We are looking forward to meet you.
See you in Nürnberg.

Your ADL Embedded Solutions Team
Hall 1, Booth 1-554

About ADL Embedded Solutions:

ADL Embedded Solutions GmbH was founded in 2010 and is a privately held company headquartered in Siegen (North Rhine-Westphalia, Germany). ADL Embedded Solutions offers its customers flexible, rugged and reliable Embedded Computer Systems. ADL Embedded Solutions is your business-critical partner. We ensure the best possible result by working with your internal team to design and build high quality custom solutions for your demanding environments. ADL Embedded Solutions products are designed to help customers develop new products for the embedded industry. ADL Embedded Solutions helps customers address challenges such as speed, size, temperature rise, power consumption, robustness, expandability, and more.

We focus on small form factor applications such as PC/104, 3.5″ boards and custom designs. In addition we assist our customers in finding the best thermal solutions for the entire line of ADL Embedded Solutions CPUs. In order to complete our product line, we provide peripherals and the necessary accessories that our customers typically need to get their designs up and running. I.e. power supplies, compact flash cards and integration service to “deep” embedded our boards into the customer's application.

We are pleased to announce that ADL Embedded Solutions GmbH is a member of the Beckhoff Automation Group.

#adl #embedded #solutions #ipc #epc #sbc #industrial #longterm #quality #madeingermany #ew #ew19 #embeddedworld #show #nuremberg #soon #seeyou #theplacetobe #iot #iiot #homeofiot #ai #vision #medical #defence #automation #sps #realtime #x86 #scada #robotics #embeddedintelligence #day1

Embedded World returns to Nuremberg on 26-28 February 2019!

Just one more day to the show.
The ADL News in front of the Embedded World doesn't stop!

ADL is proud to unveil the new ADLE3900SEC"VERTICAL" single board computer to the public at the Embedded World 2019 trade show.

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

Meet ADL at the Embedded World 2019

About ADL Embedded Solutions:

ADL Embedded Solutions GmbH was founded in 2010 and is a privately held company headquartered in Siegen (North Rhine-Westphalia, Germany). ADL Embedded Solutions offers its customers flexible, rugged and reliable Embedded Computer Systems. ADL Embedded Solutions is your business-critical partner. We ensure the best possible result by working with your internal team to design and build high quality custom solutions for your demanding environments. ADL Embedded Solutions products are designed to help customers develop new products for the embedded industry. ADL Embedded Solutions helps customers address challenges such as speed, size, temperature rise, power consumption, robustness, expandability, and more.

We focus on small form factor applications such as PC/104, 3.5″ boards and custom designs. In addition we assist our customers in finding the best thermal solutions for the entire line of ADL Embedded Solutions CPUs. In order to complete our product line, we provide peripherals and the necessary accessories that our customers typically need to get their designs up and running. I.e. power supplies, compact flash cards and integration service to “deep” embedded our boards into the customer's application.

We are pleased to announce that ADL Embedded Solutions GmbH is a member of the Beckhoff Automation Group.

#adl #adlembedded #adlembeddedsolutions #embedded #industrial #rugged #reliable #longterm #sbc #singleboardcomputer #intel #atom #apollolake #e3900 #x86 #ew #ew19 #embeddedworld #new #hardware #edge #vertical

Embedded World returns to Nuremberg on 26-28 February 2019!

ADL is proud to unveil the new ADLE3900HDC 3.5"-SBC (Single Board Computer) to the public at the Embedded World 2019 trade show.

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

ADLE3900HDC The ADLE3900HDC is the 2nd generation of optimized ADL HDC boards. It is based on Intel's SoC Atom processors of the E3900 series. Intel's 9th generation HD graphics engine supports significantly improved processing power and energy efficiency for stunning graphics performance. Even better power management features means that standby power is measured in milliwatts, enabling weeks of standby time. The ADLE3900HDC is a low I/O and low cost version of the ADLE3900HD with M.2 (Type B) 2242 SATA storage and M.2 (Type B) 2280 PCIeX1 expansion. Intel® Atom™ E3900 Processor (Apollo Lake) Quad Core (x7-E3950), Dual Core (x5-E3930) Intel® SoC ... read more What is 3.5"-SBC? ADL offers a rich portfolio of industrial 3.5” SBCs (single board computer) to meet the needs of customer-specific requirements and a variety of industrial uses. ADL’s portfolio of 3.5"-SBCS are a perfect choice for, SWAP- optimized industrial PCs HMI Panels and other space-limited applications. CONNECTORS Standard Connectors Front-side with additional On-board HIGHSPEED INTERFACE 4x PCIe X1 or 1x PCIe X4 USB INTERFACE USB 2.0 & USB 3.0 STORAGE INTERFACE SATA 3 Gb/s & SATA 6 Gb/s DIMENSION 102mm x 147mm (4" x 5.8") Connecting to sensors, cameras and storage is easy with a full range of onboard I/O: 2x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, 2x PCie, and SATA. The Intel HD Graphics engine supports video output in either HDMI or Display Port format. An onboard M.2 socket allows users to install the fastest Solid State storage solutions on the market. Extended Temperature Ratings and hard-mounted Edge-Connect design make the ADLE3900SEC ideal for rugged embedded applications. ...read more

Meet ADL at the Embedded World 2019

About ADL Embedded Solutions:

ADL Embedded Solutions GmbH was founded in 2010 and is a privately held company headquartered in Siegen (North Rhine-Westphalia, Germany). ADL Embedded Solutions offers its customers flexible, rugged and reliable Embedded Computer Systems. ADL Embedded Solutions is your business-critical partner. We ensure the best possible result by working with your internal team to design and build high quality custom solutions for your demanding environments. ADL Embedded Solutions products are designed to help customers develop new products for the embedded industry. ADL Embedded Solutions helps customers address challenges such as speed, size, temperature rise, power consumption, robustness, expandability, and more.

We focus on small form factor applications such as PC/104, 3.5″ boards and custom designs. In addition we assist our customers in finding the best thermal solutions for the entire line of ADL Embedded Solutions CPUs. In order to complete our product line, we provide peripherals and the necessary accessories that our customers typically need to get their designs up and running. I.e. power supplies, compact flash cards and integration service to “deep” embedded our boards into the customer's application.

We are pleased to announce that ADL Embedded Solutions GmbH is a member of the Beckhoff Automation Group.

#adl #adlembedded #adlembeddedsolutions #embedded #industrial #rugged #reliable #longterm #sbc #singleboardcomputer #optimized #features #m2 #mdot2 #tripplelan #intel #atom #apollolake #e3900 #x86 #ew #ew19 #embeddedworld #new #hardware

Embedded World returns to Nuremberg on 26-28 February 2019!

ADL is proud to present solutions of our storage technology provider APACER INDUSTRIAL
ADL SBC compatible form factor M.2 and SATA DoM rugged / industrial SSD drive - for harsh enviroment - for demanding applications.

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

NEW: Apacer PT120-M280 M.2 NVMe SSD   Superb performance and low latency  Supports LDPC ECC Global Wear Leveling Flash bad-block management Hyper Cache Technology Power Failure Management Thermal Management Technique End-to-End Data Protection TRIM Support Supports SSDWidget S.M.A.R.T function Over-Provisioning Apacer PT120-M280 is the next generation modularized Solid State Drive (SSD) with the shape of all new M.2 form factor, with the aim of becoming more suitable for mobile and compact computers with standard width at only 22.00 mm. PT120-M280 appears in M.2 2280 mechanical dimensions and is believed to be the leading add-in storage solution for future host computing systems. PT120-M280 is designed with SATA-based connector pinouts, providing full compliance with the latest PCIe NVMe 1.3 Gen3 x2 interface specifications to optimize the access performance. In addition, the transmission efficiency of Gen3 x2 enables the sequential read to speed up to 1600MB/sec, far more efficient than the theoretical 600MB/sec transmission performance of SATAIII. Aside from PCIe compliance, PT120-M280 delivers exceptional performance and power efficiency. On the other hand, the extreme thin and light form factor makes PT120-M280 the ideal choice for high-speed computing and real-time data processing.

NEW: Apacer SMD7 / ST170 Serie SATA DoM   Support LDPC ECC Global Wear Leveling Flash bad-block management Flash Translation Layer: Page Mapping S.M.A.R.T. and SSD Widget Power Failure Management End-to-End Data Protection TRIM Support ATA Secure Erase  Hyper Cache Technology  Over-Provisioning Apacer ST170-7LP2 (SATA Disk Module 7Pin/180 Degree Low Profile 2) is a super-mini industrial SSD module, utilizing 3D NAND for higher capacity up to 120 GB and provides more power efficiency than 2D NAND.  Designed in SATA 6.0 Gb/s interface, ST170-7LP2 can deliver outstanding performance up to 335 MB/s in reading and 235 MB/s in writing, highly suitable to serve as operating system boot drive or storage media of important data.For data efficiency, the internal controlling unit of the product is engineered with a DRAM as a write cache for enhanced random performance and endurance. Besides, ST170-7LP2 features Apacer Multi-PowerPath technology that provides three methods to supply power to the host either via a conventional cable or cable-less design via pin7 or state-of-art 7+2 pin connector, which in turn offers developers maximum flexibility when it comes to board design. Regarding reliability, ST170-7LP2 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip.

 

Meet APACER the Embedded World 2019:

 

About Apacer:

Apacer is a world-leading supplier specializing in the research and development, design, manufacturing, and marketing of industrial solid-state drives (SSD), consumer digital products, and memory modules. Since its establishment in 1997, Apacer has developed innovative products and services based on its commitment to helping customer“access the best”. Our customers include global distributors, equipment manufacturers, and retailers. We offer high-performance, high-reliability, and high-value memory modules and flash memory products for the industrial control market; for consumers, we design innovative digital storage and peripheral products for everyday use in the recording, storing, and sharing of digital data.

#ew #ew19 #embedded #embeddedworld #apacer #storage #flash #ssd #industrial #rugged #longterm #reliable #m2 #mdot2 #pcie #nvme #sata #msata

Embedded World returns to Nuremberg on 26-28 February 2019!

ADL is proud to present solutions of the leading Realtime-Ethernet and
Fieldbus-Technology provider  Hilscher Gesellschaft für Systemautomation mbH
Smallest PC cards on the automation market!
We present ADL SBC compatible form factors M.2, mPCIe (PCI Express Minicard) and PCIe X1
with up to wide industrial temp range operation!

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

CIFX M2 CIFX M2223090 The HILSCHER M.2 CIFX223090 is based on the new industrial netX90 smallest multiprotocol SoC (Cortex-M4 application processor)!  A selection of the most interesting supported protocols: EtherCAT EtherNet/IP Profi Bus Profi Net This means one hardware for all Real-Time Ethernet Slave protocols. Same application interface for all networks. Compact formfactor of the expansion card is M.2 2230 (Key A/E). Extended Temp. operation in -25°C up to +70°C Other variants (Master / Slave) or M.2 Key (B/M) are offered optionally upon project request.

CIFX hPCIe CIFX HPICE 90 The HILSCHER mPCIe CIFX HPICE 90 as well is based on the new industrial netX90 smallest multiprotocol SoC (Cortex-M4 application processor)!  A selection of the most interesting supported protocols: EtherCAT EtherNet/IP Profi Bus Profi Net This means one hardware for all Real-Time Ethernet Slave protocols. Same application interface for all networks. Compact formfactor of the expansion card is Halfsize PCI-Express Minicard (mPCIe) Extended Temp. operation in -25°C up to +70°C Other variants (Master / Slave) or Fullsize mPCIe are offered optionally upon project request.

Meet HILSCHER at the Embedded World 2019:

Booth 1-454

 

About Hilscher Gesellschaft für Systemautomation mbH:

Hilscher Gesellschaft für Systemautomation mbH was founded in 1986. Today, the company has more than 260 employees at 10 locations worldwide. With the philosophy of continuous growth based on its own resources, the company is a reliable partner for its customers. All processes are certified in accordance with ISO 9001 and 14001.

The core competence of Hilscher is ASIC technology for fieldbus and Real-Time Ethernet, as well as the development and production of industrial communication solutions for modern factory automation. Hilscher's products range from PC cards, gateways, OEM plug-in modules to powerful ASICs including all main fieldbus and Real-Time Ethernet protocol stacks. These are used worldwide for communication between automation devices and control systems. When it comes to PC cards, Hilscher is the market leader in tis field. Hilscher's unique selling point is a comprehensive portfolio of solutions for fieldbuses and Real-Time Ethernet, based on the same hardware.

Hilscher offers netX technology for device manufacturers, including development services and customized module manufacturing. In this field, Hilscher is not only recognized as a system partner of major manufacturers. The company's customer base also includes a variety of engineering firms, solution providers and system integrators. In addition, Hilscher is represented in all fieldbus and Real-Time Ethernet organizations.

 

#cifx #cifx90 #cifxm2 #cifxhpci #CIFXM2223090 #CIFXHPICE90 #ew #ew19 #embedded #embeddedworld #hilscher #feldbus #fieldbus #automation #realtime #m2 #mdot2 #mpcie #EtherCAT #EtherNet #EtherNetIP #ProfiBus #ProfiNet #Multiprotocol #master #slave #industrial #rugged #widetemp

Embedded World returns to Nuremberg on 26-28 February 2019!

ADL is proud to present solutions of the leading CAN technology provider PEAK-System Technik GmbH.
ADL SBC compatible form factors M.2 and PCIe/104 with up to 4 interfaces per controller!

Hall 1 / Booth 1-554
Embedded World 2019
Nuremberg

PCAN-M.2 The technology company PEAK-System from Darmstadt, Germany has expanded its CAN FD product line with the PCAN-M.2 Four Channel. Thanks to the mounted expansion board on the main board, four CAN FD channels are available for computers. Connection to CAN buses is made using the supplied connection cables with D-Sub connector. Each CAN FD channel can transmit a maximum of 64 data bytes of a CAN FD frame at bit rates of 20 kbit/s up to 12 Mbit/s. Each channel is also galvanically isolated up to 300 volts and can be terminated.

PCAN-PCI/104-Express FD PCAN-PCI/104-Express FD is now available as single, dual, and four-channel version. Up to four cards can be stacked for access to CAN and CAN FD networks. The connection to the CAN bus is made via the D-Sub slot brackets included in the delivery. Stack-through connectors for the PCI bus are supplied on request. The PCAN-PCI/104-Express FD reaches bit rates up to 12 Mbit/s for CAN FD frames. The galvanic isolation between the computer and the CAN side is 500 Volts. Furthermore, a 5-Volt supply for external devices and an internal termination for each CAN channel can be activated via solder bridges. Beside the hardware, there is also a product DVD with the CAN monitor PCAN-View, several APIs, and device drivers for Linux and Windows. Based on the PCI/104 form factor, compact and ruggedized solutions for industrial PCs and embedded systems exposed to harsh environments can be realized. Therefore, the PCAN-PCI/104-Express FD is well suited for applications such as medical and instrumentation technology, industrial control, aerospace, and military as well as construction vehicles. In addition, the card can be integrated on the form factors EPIC Express and EBX Express.

Meet PEAK at the Embedded World 2019:

 

About PEAK-System Technik GmbH:

Founded in 1999, PEAK-System is a leading provider of hardware, software, and services for the mobile and industrial communication sector with emphasis on the field buses CAN and LIN. 

#ew #ew19 #embedded #embeddedworld #peak #peaksystem #can #canfd #m2 #mdot2 #pcie #mpcie #pcie104